Texas Front License Plate Law (2026): Rules and Fines
Texas generally requires front and rear plates on passenger cars. See mounting rules, exceptions and the fine specified in state law.

Yes. Texas generally requires two license plates on ordinary registered passenger cars: one on the exterior front and one on the exterior rear. This is not an optional styling choice. A car having no factory-installed front bracket does not, by itself, create a blanket exemption.
This guide covers the general rules for Texas-registered passenger cars as checked on November 15, 2026. Different vehicle classes and registrations may have different rules; the state law and your registration documents control.
Does Texas require a front license plate?
Texas Transportation Code §504.943 makes it an offense to operate a motor vehicle on a public highway during a registration period without the two plates assigned to it, except as the section provides. Texas Department of Public Safety guidance also describes the front-and-rear requirement.
| Vehicle or situation | General display rule |
|---|---|
| Standard Texas-registered passenger car or SUV | One assigned plate at the exterior front and one at the exterior rear |
| Pickup registered as an ordinary passenger vehicle | Normally the same two-plate requirement |
| Motorcycle, road tractor, trailer or semitrailer | One-plate rule under §504.943(b), subject to applicable placement rules |
| Dealer operating under the statutory dealer provision | §504.943 does not apply in the same way; check the dealer-specific rules |
If you are driving a vehicle registered elsewhere, do not assume that this table resolves its requirements. Check the rules that apply to that registration and your situation.
Where does the front plate have to go?
Texas Administrative Code 43 TAC §217.27(b) gives the general placement requirements. For cars required to display two plates, they must be:
- Outside the vehicle: one on the exterior front, one on the exterior rear.
- Securely fastened: not propped loose on the dashboard or placed temporarily behind the windshield.
- Visible, readable and legible: avoid blocking the characters with an accessory or frame.
- Upright and horizontal: not rotated to fit a grille opening.
- At least 12 inches above the ground: measured from the bottom of the plate.
A windshield or dashboard display is not the exterior-front placement described in the regulation. An offset mount or a tow-hook bracket may be an option only if the resulting plate still meets the applicable visibility and positioning rules.
What is the fine for a missing front plate?
Section 504.943(e) provides for a misdemeanor with a fine not exceeding $200. This is a statutory maximum, not a claim that every citation costs $200. Court costs and case-specific outcomes are separate questions.
There is a limited possible dismissal provision in §504.943(d) for a charge under subsection (a)(1): the court may dismiss it if the assigned-plate defect is corrected before the defendant’s first court appearance and a reimbursement fee of no more than $10 is paid. This provision is discretionary and does not automatically cover every plate-placement citation. Read the exact citation before assuming a fix-it dismissal applies.
Which vehicles have exceptions?
The main statute expressly addresses road tractors, motorcycles, trailers and semitrailers under a one-plate rule. It also has a separate provision for dealers operating vehicles as provided by law. These are not permission for an ordinary car owner to remove the front plate.
If your vehicle has unusual registration, specialty equipment or a digital rear plate, verify the specific rule with TxDMV. For vehicles still subject to the two-plate requirement, a digital plate at the rear is not a reason to discard the assigned front metal plate.
What if your car has no front bracket?
A smooth front bumper is common on some sports cars, imports and EVs. The practical question is how to install the plate without obscuring sensors, airflow or the assigned characters.
| Mounting approach | What to check |
|---|---|
| Manufacturer or dealer bracket | Correct fit for the model and bumper design |
| Vehicle-specific no-drill bracket | Secure exterior attachment, visibility and ground clearance |
| Tow-hook adapter | Whether the location interferes with lights, sensors or plate legibility |
| Custom grille bracket | Rigidity and compatibility with cooling and safety equipment |
Do not drill into a bumper, sensor housing or structural component without checking the vehicle manufacturer’s guidance. A bracket advertised as “legal in all states” is not a substitute for the actual Texas placement requirements.
Texas front plate FAQ
Can I put my Texas front plate on the dashboard? The general Texas rule calls for an exterior front mounting location, so a dashboard display does not satisfy that standard.
Can I remove the front plate for a car show or photos? If you intend to operate the car on a public highway, reinstall it first unless a specific lawful exemption applies.
Is Texas a rear-plate-only state now? No. The cited law continues to require two plates for ordinary passenger vehicles.
How do Texas rules compare with other states? Use our front license plate laws by state guide or the interactive plate law checker. Both distinguish general rules from vehicle-specific exceptions.
Bottom line: For a standard Texas-registered car, mount the assigned plate securely on the exterior front and the other on the rear. Check the current rule and any unusual registration circumstances before relying on an exception.
Sources
- 1.Texas Transportation Code, Section 504.943 — Texas Legislature
- 2.Texas Administrative Code, 43 TAC 217.27 — Legal Information Institute (text of Texas regulation)
- 3.Texas license plate guidance — Texas Department of Motor Vehicles
- 4.General vehicle and driving FAQ — Texas Department of Public Safety


